Thursday, December 24, 2020

Mobile Phone network saturation problem

 An issue that has been bugging me  for past couple years,  is the trouble when you go somewhere outside the city and find you cant get a data connection on 4G. One such location is up the back of Jenolan Caves (west of Sydney), we visit and stay here nearly every year. I noticed more in recent years the difficulty sustaining a data connection or ability to make a phone call or send an SMS, this is on the Optus network, we have gone with the family so there are several of us with various phones  all on Optus.  I blamed Optus for a poor network, as it getting worse each year.   Now the reason I question this is because =, I did some study into this as I can clearly look across the valley and see  4 or 5 cell towers, I used the Cell Phone Signal App to identify the towers I can see, where Optus operating from.  I can identify what their signal strength is and which bands they operate on.  In the recent visit last July, I also took note of the times I could and couldnt get access to the network (this is on iPhones6's and Samsung7 and Samsung8) 

Basically, I could only guarantee a connection very early in the morning  (ie 6-7am or very late at night) so this proved it based on the load of the network, or the concentration of users accessing the network. I found I had to drive into Oberon to get a reliable connection for phone, SMS & data.  This is interesting, because you can see the signal bars are showing the phone can see a cell tower, but it just unbale to establish a connection.

Next, on a visit to Tumut, did a drive up to top of Snowy Mtns, we drove to Kiandra, I noticed at one stage on the drive, signal dropped out, but up on top of the plateau  at approx 1500m ASL, none of our phone could establish a connection, even though, the phone showing several bars of signal, driving back to Tumut, can see there is signal, but no, it dont want to establish a connection,  arrive back in Tumut, all the phones re-establish  connection.   At this point  I getting pretty pissed off with Optus, I am thinking what the hell is wrong with their network.

Yes, I drove from Sydney down the Hume Highway,  coverage all the way, no data dropout, as I had my APRS Droid App running on my phone, I can see all the way from Sydney to tumut, 100%  coverage on Optus 4G. So question is why is it not working up in the mountains, when I know there is signal present.

Move to November 21st, 2020, the club I belong to go to Mt Allyn for a radio contest.   drive up, set up on top of the mountain,  1135m ASL, I need to get on the web to tell people where we are,  I notice the phone connection dropping out,  but I sitting on top of a mountain,  there are towns  just down the road, I can see them in the distance, and I know the phone  was working whilst driving, as I had the APRS  Droid App on. Then one of the other guys mentions his phone not working, he got signal, but no connection, he and another fellow are on Telstra, but I am on Optus. Now, the guy who has Telstra mobile , used to work for Telstra, setting up the sites for Telstra.  At this point, I realise this is common to Telstra and Optus.

Weeks go by from here, but I still thinking about it, then it clicks, my phones can receive a signal from the cell tower. the path is LOS, but we are still quite a few kilometres away from the various towers,  like the situation at Jenolan Caves and  Snowy Mtns, I am up high, in clear LOS with towers, but no connection can be established. Of course, I am distant to the tower, there are no other competing mobile device signals near me,  but I can bet for sure, there are many more mobile devices closer in nearer the towers, so I am competing  against many more devices that are providing a stronger signal to the tower, since they are closer.  It is not like back in the days  of 2G and 3G,  we now in the realms of 4G and 5G and many more devices other than phones are accessing and using the phone network.   Of course, now we have all sorts of devices with a mobile sim fitted, such as alarm systems, home modems, in car systems, tracking systems,  IOT, so we have a bucket load of more devices, all trying to establish a connection,  each cell does not have an infinite amount of connections, each cell has a limit. I noticed more and more often ,  your phone sends an alert to tell you that you missed a voice call and you think to yourself, I did not hear that phone ringing,  its a simple reason, the network cant establish a connection to your phone, as too many other competing  devices seen at the receiver of the  cell tower. 

This explains the high demand for spectrum by the Telcos, they just grabbing as much as they can, as the demand for access is increasing faster than they can roll out cell towers.  I can see, long gone are the days we need cell towers up high for maximum coverage,  now you need lots of cell towers with low  height to create lots of micro coverage areas.   I remember  Malcolm Turnbull sprouting that we don't need  NBN fibre everywhere to provide broadband services, , we just need to run broadband from mobile network.  Well,  its 2020 and that mobile network is now SATURATED. What use is a mobile network, if you can't connect to it ?  paying a fortune for a mobile service that is no longer reliably accessible.  Its a joke,  drive a few kilometres  out of a town and no mobile service, even though your phone can clearly see the signal from the tower,  going to 5G, is not going to help, when there are a large number of 5G devices, then 5G network will be saturated. Yes, faster download on 5G, but can I establish a connection as a I get further away from town ? probably not.  I cant see that Telcos can afford to put 5G cells every 500m  apart, the cost would be mind blowing. It still comes back to need of fibre cable everywhere, just to provide the backbone infrastructure to provide bandwidth for a whole bucket of micro cells,  as the concept  of 1 or 2 cells per suburb just wont cut it, the Telcos are going to need  dozens of low powered, low height cells  to provide micro coverage areas. The cost of expanding the network will make the service prohibitive to the end user.

I guess one way to do it with current cell towers  is multiple cells with arrays from a single tower,  run multiple directional arrays, multiple feeds,  rather than just the single  omni bays,  but again the cost becomes quadrupled, or as many times as you have directional arrays spread over a 360 degree coverage area. If you have multiple directional arrays spread out over the 360degrees, then each  node receiver has a limited aperture of devices in its view.

All of this high consumption bandwidth, just for the sake of watching  crap  tv and movies. How sad. Once upon a time the internet was for doing useful things.

Tuesday, December 8, 2020

just checking on Frank VK4HFK /MM

 

just checking where Frank VK4HFK/mm is,    back in VK.

YACHT-INFO VK4HFK (yachttrack.org)

Sunday, November 29, 2020

HF APRS iGates for VK

 just throwing a list together here for the 30m/40m iGates operating  300bps APRS  here in VK.

If you seriously going to be travelling the outback, or maritime mobile around VK, then HF APRS is good for your safety,  it is 300bps APRS,  10.147600 MHz USB, 7.036 MHz LSB 

VK1IAN-1 30m ACT

VK2NA-11 30m Newcastle

VK2OL-10 30m Sydney

VK4AB-4 30m  Brisbane

VK4MQ-4 30m Toowoomba  (Direwolf)

VK4MQ-5  30m Toowoomba  (UIview-32)

VK5ARG-3  30m & 40m  Balaklava

VK5DW-5  30m  Berri

VK5RM-4  30m  Adelaide

VK5THB-4 30m Waikerie

VK6LD-4 30m  Perth

VK7KPC-4 30m Launceston

VK7ZRO-4 30m & 40m Hobart

VK8KMD-10  30m Alice Springs

VK8JG-5  30m & 40m  Darwin

Surprisingly, the ZL's don't appear to have any HF APRS iGates, with all that mountainous country, I thought their VHF APRS would have a lot of coverage holes.

And places like New Caledonia, Vanuatu, Fiji and Tonga  don't have any HF iGates, considering the maritime mobile traffic from visiting hams in that region.


postmortem of WIA VHF/UHF/SHF contest - 21st November 2020

 We went to Mt. Allyn  QF57rv,  a group of us from MWRS Club operating as VK2MB,   for the 8 hour stint,  I also  operated as myself to give out some numbers on 146.500 FM simplex to people. Nothing heard or worked on 439.000 FM or 52.525 FM

Nothing on 23cm or 9cm,   just too many damned trees sticking up. on the south-west side of the carpark, which is what we needed to get back to Sydney and beyond,  it is clear  view from north round to east,  (90 Degrees) , but south through west to north (180 deg) is buggered by big trees.

We worked ZL stations on 2m SSB.  that was the excitement, considering it was 37deg C when we got there. The dirt road to the top is thin, windy and rough, although there were cars coming up.

Overall, pretty dismal operating from this site, Telstra and Optus mobile  coverage was piss weak, considering we sitting on top of a mountain,  4G signal kept coming and going, not reliable for doing liason on vkspotter  etc.   We noted that Gerard VK2IO  did a whole lot better  operating portable from Mt. Banks QF56ej.  Need to re-evaluate where we going next time.

Thursday, November 19, 2020

VKS-737 Radio Network

 I just giving a plug here to the VKS-737 organisation, 

this is not amateur radio, but I was at my car service place yesterday and got talking with a mechanic about his 4WD who is planning to  travel around Australia, hence I mentioned to him about the VKS-737 radio network to him, because you don't want to be travelling and get stuck in middle of nowhere without communications ability.

VKS-737 Radio Network - it is a HF network, run by volunteers, to help outback travellers, typically 4WD'ers  and caravaners, if needed,  or just to keep tabs on them (check-in) when travelling around the outback, makes it easy for authorities to find you, if you don't arrive at a destination at the prescribed time.

https://vks737.radio/


Tuesday, November 17, 2020

WIA Spring VHF UHF SHF Contest 2020

 We planning to go portable to operate in the  WIA Spring VHF UHF SHF Contest weekend,  starting 0100z  Saturday 28th November 2020, concluding  0100z Sunday 29th November 2020.

Our planned destination is Mt. Allyn up in the Barrington Tops Area,   Grid Square QF57RV  at height of 1135m ASL, it is supposed to have good takeoff back towards Newcastle, Central Coast,  Sydney and Wollongong.

We planning to run 6m, 2m, 70cm, 23cm, 9cm and 3cm  SSB,  possibly 6m, 2m, 70cm, 23cm  FM simplex

Basically 50.150, 144.150, 432.150, 1296.150, 3398.100, 10368.100  SSB and

52.525, 146.500, 439.000 1294.000 FM simplex

WIA VHF UHF SHF Contest Rules found here :

https://www.wia.org.au/members/contests/vhfuhf/


VK2MB - MWRS John Moyle Field Day Contest March 2020

Here are photos from the Manly Warringah Radio Society blog for when they operated portable for the  John Moyle Field Day Contest  on 21st & 22nd March 2020, just as the Covid lockdown began.

They still had good fun and did some radio contesting.

They operated from the Polblue Campground, Barrington Tops, NSW,  QF58RB  since they working HF,

however there are some nearby high spots, clear and worthy of  VHF, UHF and SHF activity.

see the photos here :

 https://www.mwrs.org.au/2020/03/22/john-moyle-field-day-2020/

Wednesday, October 28, 2020

VK2ABP callsign

 In September, I organised an additional callsign,  I picked up VK2ABP, which was Bob Paton's callsign  prior to him becoming SK in 2012.  it is now  registered  at address for QF46pu, (locality Gowan) for which Bob often operated field portable from, for many HF Contests on the mountain top. 

As I also frequent the same site for contests I thought it only fitting to get another callsign for when I am operating from there and the obvious choice was to get Bob's old callsign and operate it in his memory as he was absolutely fanatical about contesting and DXing.  Bob would often spend the entire nights on the mountain top working the HF Contests.    Bob also operated at Davis Base in Antartica as VK0BP (1nov2008 to7mar2009) and his first callsign was VK2FBOB.

Looking up the history of the callsign VK2ABP, it was first licensed to the Broken Hill ARC prior to and post World War 2, then later to a RG Dunford of Coonabarabran in 1950's.

 

IARS 23cm simplex repeater update

  IARS 23cm Active beacon information and instructions

The Illawarra Amateur Radio Society Inc. (IARS)
is pleased to announce the testing of a Simplex Repeater operating on the 23cm band.
What
- FM Simplex Repeater operating on 1296.850MHz
- RF Power 25 Watts.
- Vertical Omnidirectional Antenna of 11dB gain.
- Input stage has a LNA with approximately +10dB Gain
Where
- Maddens Plains, Grid Reference QF55LR.
- Latitude: 34.27Deg South Longitude: 150.94Deg East
- Height: 371 Metres above sea level. (Not including the height of the tower).
Purpose
The purpose for the development of this particular repeater is;
To encourage interest and experimental development in the higher bands such as 23cm.
It can be used to assist amateur radio operators to develop their own station transmitters, receivers, RF amplifiers, pre-amplifiers and antenna design.
Test the operators experimenting with various modes.
It is a beacon which can be used to monitor propagation on the 23cm band.
Basic Description
The general principle of the repeater is that it is simple.
The transmitter stages consist of a 2 Metre exciter, followed by a transverter.
The transverter has an IF input of 144.850 MHz, up to, but no greater than 1.0W or else it may be over driven. The RF output is of the order of 2.0W. The next stage is the RF PA of 25W.
The memory of the controller chip has been programmed to function for a period of 150 seconds (2 ½  minutes) more than ample time to conduct any form of experimental test.
The antenna is a vertical omnidirectional antenna with approximately 11dB gain.
The control card was developed and built specifically by the IARS for this purpose with the microcontroller used to generate the Morse code and all the control for the simplex repeater.
The unique program code has been written inhouse and developed by IARS to suit this application.
This is all installed into a 19” rack 2U enclosure mounted in the equipment rack at Maddens Plains.
Operation of the Beacon
Approximately every 10 minutes a string of Morse Code will be transmitted from the beacon.
The interesting part of this Morse code is that it is part dynamic.
There are two values which are actively monitoring the unit on site.
The first is the Temperature inside the cabinet in degree Celsius
The second is the system voltage currently at the repeater site.
The Morse code message is structured as follows:
VK2RMP experimental beacon test QF55LR TEMP XX.X Deg. SYSTEM VOLTS XX.X
During the Beacon operation the Simplex section will not operate.
The beacon will not transmit whilst the simplex repeater operation is in progress and will wait until the simplex process is complete.
Operation Procedure of Repeater
It is a simple process after selecting the Repeater frequency.
It is recommended you wait for at least 10 seconds or press your PTT once for a short test, if a tail and beep comes back to you, you good to go.
If not, it may be that your signal is not getting in OR someone is using it on the input that you cannot hear.
Pressing the PTT quickly to see if it responds (similar to a duplex repeater tail) will not interfere with someone else’s transmission, as long as the PTT is quick, and not multiple times, this could be annoying for someone trying to record.
Summary : Onequick one second PTT should give you a Tail and a roger beep. If not someone is using the repeater OR your signal is not been received by the beacon.
If there was no response it may be good to wait for at least 30 seconds to see if the unit was in use before attempting the PTT again.
Once roger beep is received and you are ready to commence your transmission, it is best to operate the PTT button for about 1 second before speaking or transmitting data of pictures.
The reason for this is to stop any clipping at the start of the transmission. The repeater has a 0.5 second noise suppression timer to avoid false triggering.
CTCSS was not used to do this as many experimenters don’t have encoders fitted to the 23cm gear.
Once you release the PTT there is a one second delay before the recording stops and the current reception cycle is terminated, this is to allow for short signal drop off’s during your over.
Without this timer, a signal drop off may prematurely terminate your over and begin re-transmitting what you have just transmitted, whilst you are still recording, rather messy.
After this one second delay the repeater will commence to re-transmit your over. When the repeater has concluded your transmission you will hear an audible ‘Rodger Beep’ of approximately 750Hz.
It is after this Roger beep that a respondent or yourself may commence the next transmission. If you do not hear the ‘Rodger Beep” wait until you do.
Please make the transmission long enough to finish the job and short enough not to cause any others to be impatient.
Remember to be patient - including hearing the “Roger beep” - and avoid any difficulties.
When transmitting data modes such as RTTY or SSTV, ensure the transmission DOESN’T exceed the 150 second time window, because if you do, the signal will be unintelligible and fail.
Keep to the simple operating procedure and you will be able to enjoy our hobby that much more.

Sunday, September 13, 2020

Wagga Amateur Radio Club repeaters (WARC)

 Did a trip down to Tumut last weekend,   stayed out east of Tumut at Elm Cottages, Little River  Road,  beautiful countryside, and currently it is green all the way from Sydney to Tumut,  which is different than a couple years ago, or even less, where it is brown hills all the way.

Anyway, repeaters, I made sure I had the frequencies added in memory  for the trip, VK1RGI 146.950 MHz,  VK2RYG 146.875 MHz,  VK2RBE 146.775 MHz, VK2RWG 146.650, VK2RTD 146.800 MHz, I heard activity driving down the Hume Highway,  but strength of the repeaters on the Hume Highway not all the great,   Ginini  was there along the Goulburn-Yass-Browning section, but surprisingly there are a few shadows along the highway to Gundagai.  I couldnt find 146.800 in Tumut, as explained below

Also drove up to Kiandra, everything was burnt from fire last summer.  Could not get Mt Ginini 146.950  that was a big surprise, not get picked up on APRS from there either.

 I did a search on WARC and here are the details, does not seem to be any 70cm repeaters:

VK2RWG – 146.750 MHz – located at Wheel of Fortune Hill, East of Wagga Wagga. 

VK2RBE – 146.775 MHz – located at Mt Bethungra, North of Junee. 

VK2RTD – 146.800 MHz – (currently off air) located at Mt Tumorrama, Tumut 

VK2RGA – 146.825 MHz – (currently off air) (Lockhart)

Sunday, August 30, 2020

P25 Repeaters, VK1 and VK2

extract from latest WIA Repeater Database

I appending YES to ones tested in last few days

A.C.T. and New South Wales
438.1375 432.7375 VK2RHP Horsley Park Sydney (L) O - - - NME -        YES, LINKED TG10400
438.175 433.175 VK2RMB Terrey Hills Sydney O 5 150 3 2MB 91.5 1     YES, soon to be linked
438.200 432.800 VK2RCG Sydney Sydney City O - - - NME -                   YES, LINKED TG10400
438.275 432.875 VK2RWS Berowra North Sydney O - - - NWN 91.5 80
438.425 433.425 VK2RLE Engadine Sydney O 50 110 3 2LE -                   YES
438.450 433.450 VK2RCF Carlingford Sydney O - - - NME 91.5                YES
438.575 433.575 VK2ROT Paddington Sydney O 50 90 3 2BV 91.5 23       YES
438.675 433.675 VK2RPL Mt Nardi Lismore O 50 850 3 2SRC 123
439.600 434.600 VK2RRR Razorback SW Sydney 1/19 U - - - 2VVV 91.5
439.825 434.825 VK2RWK Kurrajong NW Sydney O - - - NWN 91.5 80
439.950 434.950 VK2RAG Somersby Central Coast O - 300 3 2EH 91.5     YES, LINKED TG10400
439.975 434.975 VK2RNS Hornsby Northern Sydney O 50 225 3.5 2MA - YES, LINKED TG10400

You can see they predominantly in and around Sydney

Monday, August 10, 2020

TG10400 Pacific P25 Reflector activity - 9th August 2020

another busy day for activity on TG10400, I now have a third  MMDVM hotspot setup just for P25,  this is much better than trying to monitor VK2RCG, as it has dropout issues from the network side, as when people talk directly on that repeater it is clear of dropouts, but people  coming in from network do have dropouts.

Anyway, here is  users from on TG10400 for Sunday 9th August 2020

WD6AWP, VA3POQ, KB9LCL, K6JPS, WB6ZSU, KG6DTL, VK4VTK, VK2FJAY, VK2PCH, VK3AS, VK3FKEN, VK3JMA, VK2FAEU, K5TRA, VK4CWL, VK2DEK, DK6PX, VK3FJAW, VK3FJBM - 19 users.

Interesting, just spotted activity on TG10401 I thought with WICEN  rampup last night, they might be using it,   but just  KB5XE, VK3JMA, BG2JHD

WICEN P25 Reflector TG10401

Saturday, August 8, 2020

TG4 P25 Reflector activity 8th August 2020

checking activity for the TG4 (VK4) P25 Reflector :

VK4TUX, VK4VTK, VK4UN, VK4GRB, VK3MET, VK2GP, ZL3DMH, VK3FAJH

TG4 P25 Reflector

TG10400 Pacific P25 Reflector activity - 8th August 2020

Big day of activity here on TG10400 P25 Pacific Reflector, 21 users  today

VK2PZ, VK2FAEU, VK2ERG, VK3VLA, VK2NMZ, VK3FKEN, VK3FJAY, VK7HSE, VK2FOX, VK3FXBR, VK3JMA, VK2MRC, VK3UT, VK2FPAR, VE7IOX, VK2PCH, K5TRA, VK2GP, VK4CWL, KD2EWE, VK3AS,
I noted VK2RAG has appeared as a gateway,  possibly on their P25 repeater 439.950 MHz

Also, VK2RMB 438.175 MHz P25 repeater, soon to also be linked into TG10400,  it is work in progress.

Noting some of the gateway repeaters :
VK2RAG, VK2RCG, VK2RGP, VK2RHK, VK2RHP, VK2RNS, VK3RBD, VK3RHD, VK4RDS, VK4RHG.

Pacific TG10400 P25 - NXDN Reflector

Sunday, July 26, 2020

updating NXDN Talk Groups


adding corrections for NXDN Talk Groups


NXDN / NXREF / NXCORE  Talk Groups 
Service
TalkGroup
Dashboard
Canada
TG 302
VK 505
TG 505
50599
TG 50599
CQ-UK
TG 10922
Deutsch
TG 20000
31088
TG 31088
50525
TG 50525
65000
TG 65000

Deprecated :
ZL 530
TG 530

1200
TG 1200

Pacific
TG 10400
25000
TG 25000



NXDN info

updating P25 Talk Groups


Updating the P25 list, a few groups now deprecated.

 P25  Talk Groups
Service
TalkGroup
Dashboard
World Wide
TG 10100
North America
TG 10200
North America TAC 1
TG 10201
Europe
TG 10300
Espana
TG 10301
Pacific
TG 10400
WICEN / Pacific TAC1
TG 10401
Pacific TAC2 (China)
TG 10402
VK4P25
TG 4
Canada
TG 302
Wisconsin
TG 31555
50525 (BM DMR Bridge)
TG 50525
53099   XLX750  ZL
TG 53099
http://www.xlx750.nz/
Unlink = TG 9999

Deprecated :
31665 (BM DMR Bridge)
TG 31665
31672  Pi-Star Chat
TG 31672
18.221.87.9/    
CQ-UK
TG 10120
Texas Tech
TG 31648
San Diego
TG 858

Tuesday, July 21, 2020

updated C4FM / YSF / Wires-X Talk Group Summary

corrections for :  AU NSW VK2 Chat  and   AU TAS VK7 Chat entries


C4FM  / YSF  Talk Group Summary

YSF001 Reflector  - YSF001   >   XLX389D
AU CQ-VK  Reflector  - YSF24117  >  VK-Wires-GW
50525  Bridge  - YSF06015  >   BM 50525, VK3GWY, P25
CQ-VK Wires-X – YSF38900 > AU YSF001
AU Albury Chat – YSF73082
AU NSW VK2 Chat – YSF43110
AU TAS VK7 Chat – YSF05057 > BM TG5057
XLX389 – YSF22381
XLX500 – YSF49716
XLX505 – YSF85857 > VK7HSE gateway.
XLX750 – YSF32748     (ZL Reflector)
XLX751 – YSF41007     (ZL Reflector)
FCS00114  - Repeater Australia
YSF00001 - Echo Test

Monday, July 20, 2020

P25 TG4 Reflector activity - 20th July

P25 Heard list for TG4 Reflector today :
VK7JB, VK3AS, VK4TUX, VK4FMMM, VK3JAZ

TG4 P25 Reflector

P25 activity TG10400 / VK2RCG 20th July 2020

heard a fair bit of activity again today,  some testing on VK2RCG at GPT, the guys checking audio on the rptr itself and via the network.

Heard list today :
VK3UT, VK2XE, K2ESF, VK7BS, VK2DEK, VK3FJAW, VK2PCH, K5TRA, WB6ZSU, VK3AS, VK2FAEU, VK2RB, VK3PR, VK4SM, VK2ERG, VK7HSE, VK4HG, VK3FJBM, VK3FRJD
19 today.

TG10400 P25 / NXDN Reflector

Sunday, July 19, 2020

MythBuster presenter Grant Imahar passes away

sad to hear Electrical Engineer, Grant Imahar, one of the presenters on TV show MythBusters, has   passed away last week, aged only 49.     That was a  great TV show.   I loved it.  High technical content, great stuff.  The team on MythBusters made you think.   Up there with Carl Sagan's Cosmos TV series.

Friday, July 17, 2020

activity on TG4 P25 Network

 just to cover the TG4 P25 network, this appears to be pure gateway access with no RF repeaters connected.

users seen in the heard list today  VK2EVB, VK4APF, WB2PVY, VK5MDF,  VK3PR and VK6RO
Later on  VK4CUZ, VK3LTD  and VK4JAZ


to see the Heard List go to :

TG4 P25 Reflector


Wednesday, July 15, 2020

more P25 activity for Sydney area 15th July 2020





that's P25 users today, KI6EBF, K5TRA, VK2PCH, VK2ERG, VK2FAEU & VK3FRJD that I could hear via VK2RCG 438.200MHz  and VK2RNS 439.975MHz. 

I believe that VK2RHP at  Horsley Park is also linked. It could be on 438.1375Mhz Output, 432.7375MHz Input. It is P25 only, with NAC, 0x293.

Hoping to see VK2RMB 438.175 added into the P25 network one day and along with all the other P25 repeaters in Sydney / Central Coast area.

TG10400 P25-NXDN Pacific Reflector

More stations appeared later in the afternoon, VK2FLAG, VK7BS, VE7IOX, VK3FKEN and VK3FPAR.


(click on the images to open and view in more detail.)


and even more people turned up at night VK3XEM, VK3JMA, VK2FJAY, VK2AJP and VK2DEK,
I think that adds up to 16 stations on P25 today.

new 2020 Honda Passport SUV

I just stumbled on this SUV from Honda in USA, its called Passport, it looks larger than CRV, but
has  3.5L V6 with 9-speed Automatic transmission and All-Terrain control,   wow,  not like the crap that that gets dumped in Australia that comes from Thailand with pissy little motors and CVT transmission. 

The Honda Passport SUV from USA

The Passport looks like a very nice SUV from Honda,  but a shame that we will probably never see it in Australia.

Thursday, July 9, 2020

P25 activity in Sydney 9th July 2020

Out again walking my dogs at night, I often take my Uniden scanner to listen for P25 , well...  tonight yielded some good P25 activity on 70cm,  VK2ERG, VK2MPJ, VK3FJAW, VK4HG, VK7HSE ,
they were on the P25 Pacific Reflector TG10400, which includes  P25 repeaters 438.200 MHz VK2RCG  GPT Sydney and 439.975 MHz VK2RNS Hornsby, which I could hear both while walking, plus VK3FJAW was using VK3RMC 438.875 MHz P25 down Moorabbin area.   This is good, I starting to build up a picture of these P25 connections.


Click on the image for better viewing.

VK7HSE's P25 blog extracts

Sunday, July 5, 2020

Zetland ARC - from Shetland Islands

I just stumbled onto a group of hams in the Shetland Islands and their Amateur Radio Club.
I found a ham several years ago, but he disappeared and so do his website, but glad to see more hams popped up in the Shetlands. 
I have interest in the Shetlands due to my ancestor originating from Toft, Delting & later at Haw, Gluss, Northmavine, arriving here in 1852 with his brother to work the goldfields of Ballarat.  They worked for P&O Steamship Co. (as did many Shetlanders) but bailed out when arriving in Australia to seek the riches from gold mining.

Anyway, here is the website
Zetland ARC from Shetland Islands

amazing, they have a list of hams, a lot larger than I ever found in the past.
I guess a few could be ex-pats from outside of Shetlands

Alan Catterall MM6BZQ, 
Alan Woodford 2M0CPN, MM6ACW, MM0ZAW, 
Alyson Halcrow MM0ZAL, 
Andrew Halcrow MM0LSM, 
Anna Breimann MM6IKB, 
Arthur Tait GM4LBE, 
Cecil Duncan GM0EKM, 
Christopher Halcrow MM6ZBG, 
Colin Roberts GM0AVR, 
Dean Krauskopf MM6SJK, 
Denise Woodford MM6ZDW, 
Dennis Geldard MM3VQO, 
Eldon Wigram MM7KES 
Eric Harvey MM6FFW,(left island) 
Euan Crawford MM6ISIH,2M0VIK,MM0VIK 
Gail Davis MM6YLO, 
Hamish Dally 2M0ZET, 
Hans Hassel GM4SSA, 
Hans STÖTEKNUEL MM0XAU, dj6au, 
Helen Erwood MM6MQR, 
Ian Brown GM0ILB, 
Jim Ratter GM0JDB, 
John Pumford-Green GM4SLV, 
Laura Crawford MM6YLL, 
M Smith GM3WHT, 
Magnus Henry 2M0SEG, MM6MFA,(left island) 
Mike Breimann MM6IMB, 
Michelle Leybourne MM6YLM,2M0YLM, 
Nicky Marriott MM5YLO, 
Kerry(Peter)Meyer GM4JPI, 
Peter Bruce GM0CXQ, 
Peter Davis 2M0GFC, MM6PTE, MM0NQY, 
Peter Eunson GM8YEC, 
Peter Leybourne MM5PSL, 
Peter Wilson MM6IIP, 
Peter Gaskin MM1FEO 
Paul Chant MM7BCD 
Reg Hussey GM1FGN,(SK) 
Robert Chroston MM0ZRC, 
Roger Moore MM1FJM, 
Roger Pascal GM8LNH, 
Steve Gardiner GM7GWW,
Tommy Goodlad. GM4LER, 
Tony Erwood GM7AFE, 
Tony Marriott GM0GFL, 
Will Bond MM7CGR 
W Goudie GM4WXQ,

DMR2P25 for Pi-Star MMDVM update

Looking very promising,   I just checked latest updates from the feature request discussion (as of 30th June 2020) for DMR2P25 ( that is DMR to P25 mode)  in the Pi-Star for MMDVM forum.
Thank you to Doug, AD8DP and Andy G4FDL for their development work in getting this new mode (hopefully) into Pi-Star.

Pi-Star forum - DMR2P25 feature request


DMR hotspots and 70cm band Satellite segment interference

I have mentioned in the past, about people operating their DMR hotspots on strange frequencies,  ie. some in the 70cm weak signal segments, some on the band edge where they are in breach of their license conditions, but I also seen in the social media circles of people running their hotspots right in the Satellite segments of 2metre and 70cm bands.

I mean, just because your low powered hotspots ( typically mW) cant be heard when you drive down the road a couple kilometres, doesn't mean it cant be heard from a overhead satellite. Yes, low terrain kills your hotspot's  weak signal pretty quickly, but to an overhead satellite, your little digital hotspot at home can be easily heard and therefore causes interference to other modes used via the satellites.

I can't comprehend it, are amateur radio operators showing arrogance, or ignorance, or just plain stupidity ?    Well, just look at the Brandmeister dashboard you will see lots of them,  operating their hotspots smack in the middle of the satellite segments.  It would make you laugh, if it wasn't so serious.  We (licensed amateur radio operators) are supposed to be technical minded, who sat for a technical exam, yet some of us,  have no idea where we are running out DMR/MM hotspots, with respect to the bandplans designated against our licenses.   To use a phrase that celebrity chef,  Gordon Ramsay would probably say is :  "This is F###ing Incredible !!"

So, here they are :
the 2metre and 70cm Amateur Radio satellite segments
145.800 to 146.000 MHz
435.000 to 438.000 MHz
that means you don't run digital hotspots or any other RF devices in these segments, unless you intentionally plan to operate via one of the Amateur Radio Satellites and the designated modes.